Best Sellers

Cardo Scala G4 Corded Microphone Option

£44.75

This is a replacement base for your G4 which has the microphone on a small wire rather than a rigid boom for use in full ...
find out more

Trailer Plug and Socket Upgrade Set

£17.99

Everything you need to upgrade an existing 7 pin plug / socket combination. The kit consists of:- 1 x Trailer Plug 1 x ...
find out more

SIX core Trailer Lighting Cable 7.5mm OD

£1.15

Smaller than normal trailer cable this is a 6 (SIX) core motorcycle trailer cable with a Maylar tape screen and straining core. 16 x 0.2mm ...
find out more

Cardo Scala G4 Extra Base Option

£44.75

This is an additional base for your G4 which allows you to use the G4 on another helmet.
find out more

Bike Inline Socket Bracket

£7.99

Bracket that fits behind your numberplate and mounts the inline socket vertically behind. Photo shows the bracket installed holding the inline socket. On most bikes ...
find out more

Inline Socket and Cap

£9.60

7 pin in-line motorcycle trailer socket. Waterproof to IP68. Shown without cap. The wire is jointed in the socket by means of small screwed connections. ...
find out more

Paint Protection Film by VentureShield™

Online Catalogue | Paint Protection Film by VentureShield™

Bike Kits by Manufacturer

CLICK THE IMAGE OPPOSITE - for VentureShield™ Paint Protection Kits for your make of motorcycle

Worldwide Delivery

Helmet Paint Protection System (HPPS) kits by Manufacturer

CLICK THE IMAGE OPPOSITE - for VentureShield™ Paint Protection Kits for your helmet

Worldwide Delivery

Click Here for Frequently Asked Questions

Top Performance Paint Protection Film. The Ultimate Way to Protect Your Bikes Paintwork !!

VentureShield™ is an extremely abrasive resistant film that will withstand the impact from years of stone chipping and weathering, and is guaranteed to remain optically clear year after year. The patented acrylic adhesive will withstand lubricants, oils, UV rays and mould growth. It's ability to resist yellowing, and offer the highest level of abrasion resistance is unparalleled in the industry.

Perfect for use on tanks where tankbags are used, front fairings to protect from stone chips and side panels to protect from boot marks and wearing paint away.

It's like like leaving the showroom everyday...

Installation steps for appling the VentureShield™ film patterns.

Before installing the Ventureshield patterns please consult the more detailed written instructions included with the paint protection patterns for bikes.

Work in a dust free environment, with no wind and out of direct sunlight.

Make sure the painted surface to be covered is both clean and dry.

Pre-mix the soap solution ahead of time.

Remember VentureShield™ is elastic and a very forgiving material - you can lift it and reposition it as needed, there is no reason to rush the installation.

All kits come with free squeegee and a detailed guide to help you install your protection film with ease.

1. The first step is to spray the surface where the film is to be applied with a soapy solution using a sutable mist spray container

2. Next, remove the white backing from the film and spray the exposed adhesive with the soap solution.

3. The film should then be positioned on the vehicle and another coating of soapy solution should be sprayed onto the top surface of the film.

4. The next step is to pick a starting position, peel that corner up and then spray a plain water solution under the film.

5. Now squeegee the film down at that start point to tack the pattern down in place.

6. Now spray the outside of the film with the soapy solution again, and start to squeegee from the start position outwards towards the edges, stretching the film with the palm of the hand as necessary to fit the part to the bike.

7. The final step is to seal and dry the edges using your squeegee and a dry towel.

That's it finished. Your paint protection film is in place protecting your bike.

Lifetime Guarantee

VentureShield™ Paint Protection film is guaranteed againt yellowing, cracking, bubbling and peeling, providing fitment is carried out to manufacturer's specification.

Online Catalogue | Paint Protection Film by VentureShield™